Bolex
Accessories |
Ares Bolex 15mm Rod Support Bracket with rods New Design |
$400.00 |
Bolex Rods Support and 15mm rods for flat base cameras
Compatable with
Bolex H8/H16 RX3-4-5,Bolex Reg 16 or S16mm SBM. EBM, Bolex EL, Bolex H-8 Rex3 & H-8 Rex 4 model
cameras
Fully adjustable and comes with a set of 15mm rods.
Custom Made & Nicely Machined
![](shots/film%20camera%20accessories/Bolexrodsupportfrontview2.jpg)
![](shots/film%20camera%20accessories/Bolexrodsupportfrontview.jpg)
![](shots/film%20camera%20accessories/Bolexrodadapterwithcamera.jpg)
|
Bolex Winding Crank Handle with Rex-O-Fader |
$ 150.00 |
Bolex
Winding Crank Handle
With Rex-O-Fader
For Bolex cameras with Variable shutter, Automatically & smoothly
opens and closes the variable shutter, allows for quality fades
and lap dissolves. |
Bolex Winding Crank Handle |
$ 150.00 |
Bolex
Winding Crank Handle
For Most Bolex Spring Wind Models
Needed to wind up the spring motor in your camera. |
Bolex Rewind Crank |
$ 60 |
Bolex
Rewind Crank
For Most Bolex cameras
Must Specify model type to assure proper style handle, Allows you
to hand crank your cameras mechanism in reverse or forward operation. |
Bolex Macro Extension Tubes |
$ 95 |
Bolex
macro Extension Tubes
For C mount lenses
Set of 4 tubes (5mm,10mm,20mm & 40mm long) |
Bolex cable release with adapter |
$ 125 |
Bolex
Cable Release
With Adapter (assorted lengths)
For Most Model Bolex cameras
Used for Normal or Single frame or Animation |
Switar 32mm-49mm or 38mm-49mm Step up Ring Adapter
with cap |
$ 50 |
![](shots/film%20camera%20accessories/switarlensadapter36mm.jpg) ![](shots/film%20camera%20accessories/Switarlensadapter36mmwithlens.jpg)
32mm-49mm Step Up ring (for 10mm,16mm,25mm,Yvar 75mm lenses)
38mm-49mm Step Up ring
41mm-49mm Step Up Ring (for Switar 75mm) $30.00
Works with New Style & or Old Style Switar lenses 10mm,16mm,25mm,26mm,75mm
Primes
Have all your prime lenses set up with 49mm threaded fronts for
better filter compatablity |
Bolex gel filter holder & sleeve (set of 5) |
$ 125 |
Bolex
Filter frame holder with Sleeve
Good for most Bolex H-16 model cameras,Allows you to use wrattan
gel filters with this frame holder
Comes with case , 5 filter frames & cutter or $30.00 each |
Bolex Gelatin filter frame holder (Bayo turret style) |
$ 35 |
Bolex
Gelatin Filter frame holder
For Bolex EL, EBM & SBM
Bayonette Model cameras |
Bolex Helicoil Tripod adapter |
$ 15 |
Bolex
Tripod reducer
Bolex helicoil adapter Tripod screw adapter insert 3/8"x16
- 1/4"x20 reducer |
Bolex Auxilliary Sidefinder Directors Viewfinder |
$ 50 |
Bolex
Auxilliary Side Finder
Directors viewfinder that mounts to most Bolex camera doors.
focal lengths for 10mm,16mm,25mm,35mm
50mm,75mm,100mm,150mm lenses |
Bolex ESM Motor for H16 Cameras |
$ 595.00 |
Bolex
ESM Motor Includes power cable
For use with most H16 cameras
Variable Speeds 10,18,24,25,50 FPS & Crystal Sync (controller
needed)
Requires 12V battery not included
Includes ESM Power cable to 4-pin XLR |
Bolex EM Motor for H16 Cameras |
$ 350 |
Bolex
EM Motor Includes power cable
For use with most H16 cameras
Speeds 12 + 25 FPS (forward & reverse) Good for use with WM
motor
Requires 12V battery not included |
Bolex MST 24FPS Motor for H16 Cameras |
$ 350 |
Bolex
MST Motor 24fps Includes power cable
For use with most H16 cameras
Good for Use with MM Magazine Type Motor
Requires 12V battery not included |
Bolex Declic on/off Handgrip |
$ 350 |
Bolex
Declic on/off handgrip
circular quick release plate $50.00 Not included
Gives a good firm grip on the camera, Quickly mounts to the flat
base of your camera ,allows you to trigger camera as well. |
Bolex Electric on/off Handgrip |
$ 350 |
Bolex
electric on/off handgrip with motor cable
circular quick release plate $50.00 Not Included
Gives a good firm grip on the camera, Quickly mounts to the flat
base of your camera ,allows you to trigger camera as well with other
motors. |
Bolex Old Style on/off Handgrip |
$ 100 |
Bolex
Old Style on/off handgrip
For Round base Style Bolex cameras H16 or H8 models
Comes with tiedown screw. Please specify size.
Gives a good firm grip on the camera, Quickly mounts to the flat
base of your camera ,allows you to trigger camera as well with other
motors. |
Bolex 12V Powergrip Handgrip for EBM cameras |
$ 450 |
Bolex
Powergrip on/off Handgrip
includes circular quick release plate
Gives a good firm grip on the camera, Quickly mounts to the flat
base of your camera ,allows you to trigger camera on/off.
12V grip battery & charger not included |
Bolex EBM Power Grip Battery
2200mah NiMh |
$ 250 |
Bolex
EBM 12Volt 2200mah Nimh
Powergrip Type battery
Charger & Charging cable may be required
Powergrip Tuschel Charging cable $35
|
Bolex C-Mount Front turret plug (cap) |
$ 20 |
Bolex
C Mount Turret Cap
|
Bolex C-Mount Locking Turret plug (cap) |
$ 35 |
Bolex
C Mount
Locking Turret Cap
This turret plug will prevent your cameras 3 lens turret from turning
or moving especially when using heavier lenses, also used to prevent
light from exposing through your turret. |
16mm 100' empty daylight spool |
$ 10.00 |
Empty
100' daylight spool
Take up spool required when filming with your bolex camera. |
Bolex Camera Body Rollers set |
$ 100 |
Bolex
16mm Film
Body Rollers Set of 2
Used when using 400' Magazine
$50.00 each roller |
Bolex Magazine Port throat cover |
$ 150 |
Bolex
Throat cover, port cover
For Rex 5 , EBM, EL & SBM Models
Use this accessory when your not using a 400' Magazine to cap off
the empty port slot where your magazine would fit onto. |
Bolex Rubber eyecup |
$ 30 |
Bolex
Rubber Eyecup
Good for Bolex cameras with a
10x Viewfinder or 13x Viewfinder
|
Bolex 400' magazine (Rex 5, SBM, EBM, EL) |
$ 350 |
Bolex
400' 16mm Film Magazine
Comes with 2 reg Core adapters
For Rex 5 ,SBM, EBM & EL models |
Bolex magazine core adapters |
$ 100 |
Bolex
16mm core adapters
Pair of 2 adapters needed when using 400' Magazine
$50.00 each adapter |
Bolex MM type magazine torque Motor with cable |
$ 250.00 |
MM
type magazine torque motor
with connecting motor tuschel cable
Requires magazine & camera motor |
Bolex Bayonette Turret Cap |
$ 45 |
Bolex
bayonette turret Cap
Dust cover protects your cameras prism from dust and debris. |
Bolex Bayonette rear lens Cap |
$35 |
Bolex
bayonette rear lens Cap
Dust cover protects your lens from dust and debris. |
Bolex Bayo-mount - PL mount adpater |
$ 550 |
Bolex
bayo mount to PL mount lens adapter
Lets you use Pl mounted lenses on a Bolex SBM or EBM model camera.
Also available for rental
|
Bolex C-mount - PL mount adpater |
$ 550 |
Bolex
C mount to PL mount lens adapter
Lets you use Pl mounted lenses on a C mount camera.
Also available for rental
|
Bolex Bayo mount - C mount adapter |
$ 200 |
Bolex
bayonette - C mount adapter
Converts the camera bolex bayonette mount to a C mount turret. |
Bolex Bayo mount - Arri bayo mount adapter |
$ sold |
Bolex
bayonette - Arri Bayo mount adapter
Converts the camera bolex bayonette mount to an Arri Bayo mount
Rare item |
Bolex EBM On/off power cable (7-pin tuschel male-4pin
XLR male)-For external 12 volt operation. |
$ 125 |
![](shots/film%20camera%20accessories/EBMonoffcable.jpg) ![](shots/film%20camera%20accessories/ebmonoffcablewcamera.jpg)
Custom Made on/off power cable for use with Bolex EBM camera when
using an external 12 volt battery
7-Pin Tuschel - 4-Pin Xlr power cable with an inline on/off switch |
Bolex Right Angle Prism |
$ 75 |
Birns
And Sawyer right Angle Prism
This tool is for use when checking Bolex gates & ground glass
or lens coverage.
|
Canon
Super 8 Accessories |
Canon 1014/814XLS C-8 Wide Angle Adapter |
$ 250 |
Canon
C-8 Wide Angle Adapter
Works with Canon 1014XLS / 814XLS S8mm Cameras
67mm thread , 62mm step down ring needed for 814XLS
|
Canon 1014/814XLS C-8 1.4X Tele Extender Adapter |
$ 250 |
Canon
C-8 1.4X Tele extender Adapter
Works with Canon 1014XLS / 814XLS S8mm Cameras
67mm thread , 62mm step down ring needed for 814XLS
|
Canon 518 Auto Zoom 1.6X Tele Extender Adapter |
$ 50 |
Canon
1.6X Tele extender Adapter
Works with Canon 518 Auto Zoom & 518AZ SV S8mm Cameras
|
Canon
Scoopic Accessories |
Canon Scoopic 6 Volt 320 mah Onboard battery |
$ 195 |
Scoopic
12V Onboard battery
With 2 new 6 Volt cells installed
For use with Canon Scoopic Old style cameras
Charger not included
|
Canon Scoopic Rubber Eyecup |
$ sold out |
Scoopic
Rubber eyecup (Black)
For use with Canon Scoopic cameras
|
Canon Scoopic Rubber Eyecup |
$ 45 |
Scoopic
Rubber eyecup (grey)
For use with Canon Scoopic cameras
|
CP-16 400' magazine for Canon Scoopic cameras |
$ 250 |
Cinema
Products Cp-16 PLC-4A
400' Magazine complete with 2x core adapters
For use with Canon Scoopic MS cameras when using the Magazine
attachment accessory.
|
Canon Scoopic magazine adapter for Scoopic MS |
$ |
Canon
Scoopic Magazine adapter
Use with CP 400' Magazine & Scoopic onboard battery
For use with Canon Scoopic MS cameras when using the Magazine
attachment accessory.
|
Beaulieu
Accessories |
Beaulieu R-16 200' Magazine
|
$ 350 |
Works
with Beaulieu R-16 cameras only
Comes with 200' empty daylight spool
|
Beaulieu R-16 Powergrip
|
$ 250 |
Works
with Beaulieu R-16 Cameras only
Requires R-16 7.2V Onboard battery
|
Beaulieu R-16 Powergrip 7.2V
Onboard battery |
$ 250 |
Recelled
R-16 7.2V Onboard battery
Works with Beaulieu R-16 Cameras only
Requires R-16 Powergrip
|
Beaulieu Rewind Knob
|
$ 35 |
Works
with Beaulieu Super 8mm cameras only
|
Beaulieu Filter Key
|
$ 30 |
Works
with Some Beaulieu Super 8mm cameras only
This accessory allows you to remove your cameras 85 built in
filter manually.
|
Beaulieu Wrist Carrying Strap
|
$ 25 |
Works
with Beaulieu cameras or any camera that has a 1/4x20 tiedown
screw located on the bottom of the camera.
|
Beaulieu 4008 Series Dummy battery
Adapter |
$ 200 |
Works
with Beaulieu Series Cameras 4008, 4008ZM, 4008ZM2, 4008ZM4 only
Allows use of external batteries to be connected to camera via
power cable. Longer life battery solutions can be obtained this
way.
Requires:
Beaulieu battery & power cable
|
Beaulieu 2008S Series Dummy battery
Adapter |
$ call |
Works
with Beaulieu 2008S models only
Allows use of external batteries to be connected to camera via
power cable. Longer life battery solutions can be obtained this
way.
Requires Battery & power cable not Inc.
|
Beaulieu Onboard Battery Charging
Adapter |
$ 25 |
Works
with Beaulieu onboard batteries
Allow you to charge your external batteries
Requires Battery & charger not Included
|
Beaulieu Power cable (made
by Du All camera) |
$ 45 |
Works
with Du All Cameras Beaulieu batteries
For camera Models 2008S, 4008, 4008 ZM2, 4008 ZM4, 5008.S, R-16
6' long power cable (3-Pin Male DIN connector to 4-pin female),
this power cable is designed to fit with our custom made Beaulieu
batteries.
|
Nizo
Accessories |
PX625a 1.5V Button Cell (for S8mm camera meters) |
$ 5.00 |
PXM-625a
1.5V Button cell battery
For use with most Super 8mm film cameras to operate the cameras
light meter, not all Super 8mm cameras will require these specialty
batteries.
Most cameras require 2 button cells
Each cell $5.00
|
Nizo UWL 1 Wide Angle Adapter |
$ sold |
(Wide Angle Adapter) Fits the following cameras
Any Nizo camera that has macro feature and 49-52mm filter thread
Models: 156 macro, 481 Macro, 561 Macro, 1048, 3048, 2056, 3056,
4056, 6056, Nikon R8, Bauer C8 Macro, Royal 6 Macro
Example:
7-56mm will convert to 4mm
8-48mm will convert to a 4.4mm
|
Nizo UWL 2 Wide Angle Adapter |
$ sold |
(Wide Angle Adapter) Fits the following cameras
all cameras that have a lens thread M58 x 0,75 like Schneider
MACRO Variogon 1:1,2/8-40mm, 1:1,2/7,5-45mm and 1:1,2/7-50mm,
Canon 814 E, 1014E
|
Nizo UWL 3 Wide Angle Adapter |
$ sold |
(Wide Angle Adapter) Fits the following cameras
Any Nizo camera that has macro feature and 62-67mm filter thread
Fits Schneider 6-70mm Zoom lens
Models: 4080, 6080, Professional, 801 Macro, Bauer A 512, C 109
XL, C 900 XLM
Bauer S 209 XL, 409 XL, S 609 XL, 709 XL
|
Nizo on/off remote switch |
$ 25.00 |
Braun Nizo on/off Remote switch
Work for Most Nizo model cameras
|
Nizo Shoulder Support |
$ 50.00 |
Braun Nizo Shoulder Support
Work for Most Nizo model cameras
1/4x20" tiedown
|
Nizo AA Akku battery box (replacement) |
$ 50.00 |
Nizo Akku box
battery container hold 6xAA batteries
Work for Most Nizo model cameras, AA batteries not included
|
Aaton
16mm Accessories |
Aaton 15mm Rod Support Studio adapter with On/Off grip
mount |
$ 200 |
![click for full size](shots/film%20camera%20accessories/AATONRODSUPPORT.jpg) ![click for full size](shots/film%20camera%20accessories/Aatonrodsupport2.jpg)
Aaton Studio 15mm Rod adapter
Comes with 2" 15mm rods includes all tiedown screws
Allows you to go from mini to studio supprt for 15mm rods
And this unit can also be used to mount your cameras on/off handgrip
|
Aaton Relocation Mounting assembly with tiedown |
$ 100 |
![click for full size](shots/film%20camera%20accessories/Aatonrelocationmount.jpg) ![click for full size](shots/film%20camera%20accessories/Aatonrelocationmount2.jpg)
Aaton On/Off handgrip relocation mounting assembly
For use with for Super 16mm Cameras model cameras
Allows you mount your handgrip safely with the cameras that have
the S16mm upgrade so it would not be a problem with any wiring
interference.
|
Arriflex
16mm Accessories |
Arriflex Rubber Eyecup |
$ 45 |
Arriflex
Rubber eyecup (grey)
For use with Arri 25mm type eyepiece
|
Arriflex 25mm Eyepiece with Rubber Eyecup |
$ 350 |
Arriflex
25mm Eyepiece with
Rubber eyecup (grey)
For use with Arri cameras
Arri S/B, Arri 16BL, Arri M, Arri SR1,2,3
Arri 2C, Arri S
|
Arriflex 2x2 Mattebox with beam |
$ 250 |
Arriflex
2x2 Mattebox with Beam
For use with Arri S, Arri S/B , Arri M cameras
2 Stages, 1 Rotatable, Will take 2x2 sliding glass filters or
gel filters with filter frame, not included.
|
Arri S Arri S/B 400' Magazine |
$ 250 |
Arriflex
400' 16mm Magazine
For use with Arri S or Arri S/B 16mm film cameras.
Comes with 2 regular core adapters
|
Arri S Arri S/B 400' Magazine & Torque Motor |
$ 500 |
Arriflex
400' 16mm Magazine & torque motor.
For use with Arri S or Arri S/B 16mm film cameras.
Comes with 2 core adapters.
|
Arri Magazine Torque Motor |
$ 250 |
Arriflex
Magazine torque motor
For use with Arri S or Arri S/B 16mm film 400' magazines
Motor is needed when using a 400' magazine. May require 12V upgrade.
|
Arriflex Regular Core adapter |
$ 95 |
Arriflex
Regular Core adapter for 16mm Magazines
For use with Arri 16mm film cameras
|
Arriflex Collapsable Core adapter |
$ 150 |
Arriflex
Collapsable style Core adapter for 16mm Magazines
For use with Arri 16mm film cameras
|
Arriflex 16mm Core adapters |
$ 225 |
Arriflex
Regular & Collapsable style Core adapter for 16mm Magazines
For use with Arri 16mm film cameras
|
TCS TXM-22 Crystal speed motor (New) |
$ sold |
TCS
TXM-22
Crystal Speed Motor for Arri 16-S, Arri
S/B and Arri M cameras.
Runs forward and reverse.
|
TCS TM-23 Variable speed motor |
$ 500 |
TCS
TM-23
Variable Speed Motor for Arri 16-S, Arri
S/B and Arri M cameras. Runs forward and reverse.
|
Arriflex Variable Speed Motor |
$ 500 |
Arriflex
variable Speed motor
Variable Speed Motor for Arri 16-S, Arri
S/B and Arri M cameras.
Runs forward and reverse.
Good with 8v or 12Volts
|
Arriflex 24fps Constant Speed Motor |
$ 350 |
Arriflex
Constant Speed motor
24FPS Constant Speed Motor for Arri 16-S,
Arri S/B and Arri M cameras.
Runs forward only
Good with 8v or 12Volts
|
Lentequip Arri 16SR 14.4V 3.0
AH NiCad On-Board Battery (new) |
$ 275 |
14.4
Volt 3000Mah NiCad Onboard battery with new cells installed
For use with Arr SR cameras
SR1, SR2, Arri SR Super16
Onboard battery adapter required
|
Lentequip Arri 16SR3 24V 1.4ah
NiCad On-Board Battery (new) |
$ 350 |
24
Volt 1400Mah NiCad Onboard battery with new cells installed
For use with Arr SR3 S16mm cameras
Onboard battery adapter required
|