Custom Order - Takes Approx 2-3 weeks to fulfill order
The Looper can be used on Eiki, Elmo, and probably many other brands of projectors. As long as you can mount it on top and the projector arms can be adjusted and will stay in place.
Set up & Installation Instruction videos below
Tools Required
3/8" open-end wrench
8mm Wrench (if stock handle needs to be removed)
Tape
Splicer
The 8mm wrench is to remove the stock projector handle. If you purchased the projector with the looper, then the mouting handle is already installed and you don't need an 8mm wrench. The 3/8" wrench is to mount the looper handle and also to attach the looper. A 10mm wrench will work on the 3/8" nuts.
If you don't have a splicer you can use clear tape as a splice.
